Index head
navigationenglish websitegerman websitecontactlaboratory equipmentlaboratory instrumentsoxygen and other gas sensorsfront page

Trace Oxygen(O2) Sensor TOS 2.0

Trace Oxygen Sensor TOS 2.0
Sensor Head (SH) and Sensor Control and Display Unit(SCU)

The Trace Oxygen Gas Sensor TOS 2.0 is a miniaturized limiting current type amperometric device for low oxygen partial pressure measurements. It is based on the application of advanced solid oxide ion conducting electrolytes with improved electrochemical and thermo-mechanical properties. It does not require reference electrodes which might become used up in the course of time. All parts are solid and the measurement does not lead to an increase in the water vapor pressure. The sensor is selective to oxygen and does not require maintenance.

Voltages and currents are controlled and measured with high precision by a separate or directly connected Sensor Control Unit (SCU), which also includes the precise temperature control of the sensor element.

The large LC-display shows directly the oxygen partial pressure in ppm with high precision at any oxygen partial pressure.

The sensor head (SH) is available directly connected to the SCU, as a stand-free device or with connectors to walls and ceilings, integrated into gas-tight feed-throughs or in customer-designed devices

Typical Areas of Application

All applications which require inert (oxygen-free) conditions, such as
- Inert gas ("dry") boxes and chambers
- Semiconductor device production
- Food packaging

Specifications

Applicable oxygen(O2) partial pressure range:
0 - 200 ppm (standard); Resolution: 0.1 ppm
or 0 - 2000 ppm (optional); Resolution: 1 ppm
Selective to oxygen(O2) (primarily)
Response time: t90 < 30 sec
LCD-display (31/2 digits) of the oxygen(O2) partial pressure
Analogue output: 10 and 1 mV/ppm for the range up to 200 and 2000 ppm, respectively;
4 - 20 mA for the ranges 0 - 200 and 0 - 2000 ppm (linearly); optionally, other settings are possible
Power supply: 220 V AC (50 - 60 Hz); 110 V AC (50 - 60 Hz) (optionally)
Power consumption: max 15 W
Temperature control of the active sensor element ± 0.1 - 1 °C
(dependent on the flow rate of the gas)
Accuracy: ± (5% reading + 0.1 % full range)
Signal stability: ± 3 %/year
Warranty: 2 years

Dimensions

Sensor head: 2 cm in diameter x 4.2 cm in length
Read out box: w x h x d = 23.5 x 13.5 x 26 cm3
Weight: 3 kp